Sales
REPAIR MORTAR TM 78/31
Repair mortar TM 78/31 0.5 mm (5105)mortar TM 78/31 2.0 mm (5136)
Product description
Repair mortar TM 78/31 is a quick setting mortar, made of Portland cement and synthetic resins. Repair mortar TM 78/31 has good adhesive strength, which provides for excellent adhesion even to small surfaces. The product has a remarkable workabilA special component ensures the mortar not to dry up too fast, prevent“burning” of the mortar.
Application
Repair mortar TM 78/31 is used:
- for repairing gravel pockets, batteangles and edges
- for sealing joints and gaps
- for bedding concrete units, sealing cracks in prestressed concrete or the cones of tendons
- to make thin levelling courses on floors,wallsandpillars
User instructions
Repair mortar TM 78/31 is mixed with water until the desired workability is reached (about 5.5 litres of water are added for every 25 kg of Repair mortar TM 78/31). The ready mortar is applied to the cleaned, wetted surface with appropriate tools. Loose particles, dirt and other substances which could negatively influencesurfaceadhesion have to be removed before the application. Thin layers of mortar should be protected from premature drying through the application of Curing Compound AC-1 (Art. No. 3204).
Yield
N.a.
Technical data
- State of aggregation: powder
- Colour: grey
- Density (kg/l): n.a.
- pH-Value: n.a.
- max. alkali content (% Na2O-eq): n.a.
- max. chloride content (%): n.a.
- Colour code: n.a.
- Storage: dry, frost-protected, in closed packaging
- Shelf-life: when stored correctly at least 6 months after date of produc
Packaging
Sacks, pallets, big bags.
REPAIR MORTAR TM 88/14
Repair mortar TM 88/14 0.5 mm (5108)mortar TM 88/14 H (5099)mortar TM 88/14 S2 (5169)
Product description
Repair mortar TM 88/14 consists of high-quality CEM-I cement and quartz sand with a maximum grain size of 0.5 mm; Repair mortar TM 88/14 H is based on high-quality CEM-III cement; Repair mortar TM 88/14 S2 has a shortened processing time of approxi30 minutes and is used for fast repairs. Synthetic resins are added to all three types to ensure good adheRepair mortar TM 88/14 is perfectly suitable for repairing and fillflawsonconcreteandmortarunits.By intermixing the different types of Repair mortar TM 88/14, the repair mortar can be adjusted in colour to fitthe unit to be repaired. Layers applied can be up to 40 mm thick.
Application
Repair mortar TM is used to repair concrete and mortar parts of all kinds, e.g. battered edges and angles; to fill flaws like shrink holes and gravel pockets.
Yield
100 kg Repair mortar TM 88/14, 88/14 H and 88/14 S2 will yield about 50 liof ready mortar.
User instructions
The surface has to be thoroughly cleaned, loose particles, grease, oils, and any other substances which could negatively influencesurfaceadhesionhave to be removed. The surface has to be wetted before the applicaof the mortar. Depending on the consistency desired, for every 25 kg of Repair mortar TM 88/14 about 4-5 litres of water have to be added. The product is preferably mixed in a rotary-drum or compulsory mixer, smaller amounts can be prepared manually. Mixing time is about 3 minutes; protime is about 30-45 minutes, depending on the type of product and the temperature. The freshly-treated surfaces should be treated with Curing Compound TM AC-1 (Art. No. 3204) to prevent the repair mortar from premature drying. The product is not suitable to be processed at freetemperatures.
Strength and shrinkage behaviour of Repair mortar TM 88/14 0.5 mm, Repair mortar TM 88/14 H and Repair mortar TM 88/14 S2 at 20ºC if 4.5 litres of water were added for every 25 kg of dry mortar:
Technical data
- State of aggregation: powder
- Colour: grey
- Density (kg/l): n.a.
- pH-Value: n.a.
- max. alkali content (% Na2O-eq): n.a.
- max. chloride content (%): n.a.
- Colour code: n.a.
- Storage: dry, frost-protected, in closed packaging
- Shelf-life: when stored correctly at least 6 months after date of produc
Packaging
Sacks, pallets, big bags.
Remarks
Clean used equipment with water.